poslat odkaz na aplikaci

Franke AQUA 3000 open


4.8 ( 6368 ratings )
Nástroje Katalogy Nakupování
Vývojář: M-PLY
Zdarma

The responsible and efficient use of water as a natural resource is a central objective for modern buildings. Franke Water Systems provides optimally devised sanitary solutions to assist building and facility designers in their quest to achieve a sustainable level of operation. The AQUA 3000 open water management system establishes a balance between ecology and economy, between hygiene and consumption and between planning and operation.

The App shows for example all available features, e.g. hygiene flushings, setting of parameters, thermal disinfections, avoiding of synchronous flushings, chargeable water delivery, switching of program modes, shut-off for cleaning, BMS connection, fault message and statistic functions.

A sophisticated, complete water management system facilitates economical operation of all cnnected components. Shower fittings, wash taps as well as flush valves can be connected. The system can be individually programmed and expanded as required. Water volumes, hygiene flushing, thermal disinfection and respective temperature limits can be set individually for each room and even for each fitting. Malfunctions are immediately detected and reported by the system. Efficient water heating reduces power consumption. The resulting potential savings significantly reduce the payback period.

The AQUA 3000 open water management system is based on an innovative electronic platform featuring advanced architecture that presents installers and operators with a much easier, more reliable, functional, hygienic and economical system which is even easier to integrate into host networks. The further enhanced AQUA 3000 open intelligent water management system is consistently structured into two levels – fittings and network – which can communicate with each other via different data protocols such as Ethernet, BacNet, KNX or ModBus. The most important water delivery functions are controlled at the fittings level. The ECC2 (ECC = Ethernet-CAN-Coupler) function controller and the integrated WEB server facilitate additional functions ranging up to a CAFM connection.